Popular Chinese Copper Sulphate Hot Air Drying Machine Flash Dryer
Hi, I am Joanna And now working for Changzhou ZHENXING Environmental Technology Engineering Co., Ltd.I know you are look;
|Material Status||Bulk, Filter Cakes|
|Drying Medium||Superheated Steam, Air|
|Operation Pressure||Atmospheric Pressure|
|Production Capacity||4 Sets/Month|
Product DescriptionHi, I am Joanna
And now working for Changzhou ZHENXING Environmental Technology Engineering Co., Ltd.I know you are looking for good-quality dryer equipment.
Any questions about the drum dryer feel free to contact me, I would like to offer you full technical support and online video service, it will help you to know about the full drying system very well.
So our company can be a good choice, WHY?
You may be interested in the following information:
- Detail of equipment, instruments. Brands.
- Detail of the construction material.
- Detail of automation
- Whether or not it includes assembly.
- Startup and guarantees.
- Process parameters.
- Percentage of product loss.
- Quality parameters of the final product.
- Recommended operating time between power line CIP ("Clean In Place").
- Information plans for civil works, indicating necessary dimensions and levels, loads on slabs and bases, etc.
- The layout of the installation.
- Instruction manual for operation and maintenance.
- List of spare parts.
XSG model spin flash dryer is designed by ourselves. The hot air enters the dryer chamber from the bottom of the dryer host, it's going into the dryer chamber by the inlet entrance. The rotor at the conical base of the drying chamber fluidity products particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated.Using the heat from the air stream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters.Typically, cyclones are followed by scrubbers or bag filters for the final cleaning of the exhaust gases to meet current emission requirements.Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the airflow for further drying and powdering.
The advantage compared with the others
2.1 Adopt 2 lines tangential air enter into volute at the best position, it will improve or remove blind Angle of wind and also the wind in the weak2.2 Be good at controlling the powder's moisture, fineness, and hold time. for control the speed coordinating and unifying at spinning disk work with wind-enter, it can ensure the outlet wind with low temperature, it will also reduce the energy consumption.2.3 The special alloy steel be used in the rotary blade, the layout structure with unique, it has the character of small erosion, contact surface wide, cutting force strong.2.4 Adopt the newly leak-proof structure; the main engine bearing life will be delayed and the bearing black with the cooling device.2.5 In order to ensure the powder water content is less than 0.5%, so increase the height than the original basis, it is also equipped with a spinning disk, which will make the powder quality and particle size meet your requirement.Due to the gas-solid corresponding relative velocity big, even though the mix temperature is around 80~90ºC, the powder temperature is still below 45ºC condition, it will help to pack and save energy.
Equipment design conditions
Material and liquid conditions
|5||Material||Contact part SS304|
|6||Heat source||Direct gas furnace|
Installation and Commissioning and Training:1. Buyers arrange installation and debugging by themselves under a manual book from the supplier.2. If the buyer requires engineers from the seller's party, the buyer should arrange the following items:(A)Within 30 days after the machines are delivered to the buyer's factory, the buyer shall inform the seller to arrange engineers to the buyer's factory for installation, commissioning, test, and training machine operators.(B)The buyer should provide the engineers(1-2 person) the boarding and lodging, transportation during the engineer's stay in the buyer's country, and round trip air ticket and visa fee for the engineers. Besides, the buyer should pay the money as salary for one engineer per day.ProjectCompany Information
ZHENXING was founded in 1993. We are specialized in the development and manufacturing of dryers, mixers, granulators, grinders, and etc. Our company has cooperated with a number of research institutions since 2007 and we have established the largest sludge drying equipment testing center in China. All Dryer is widely applied in all kinds of industrial fields.
You may also like